Cross-Connection Control Program

A Cross-Connection is any actual or potential connection between the public water system and a source of contamination or pollution.

The Cross-Connection Control Program aims to protect the public water system from the user’s service connection by eliminating or controlling actual or potential cross-connections.

Cross-Connection Control Program PDF

Standard Installation Requirements

All backflow prevention assemblies must be installed in accordance with Division 8 of the City of Fort Smith’s Cross-Connection Control Program. Below is a quick reference guide for the installation of an approved backflow prevention assembly.

Backflow Prevention Assembly Typical Requirements

Plans & Standard Installation Drawings & Notes

Plans for installing backflow prevention assemblies on water service lines are required to be submitted to the Building Services Department. Plans must include current standard installation drawings and notes.

Below are the standard outdoor and indoor installation drawings and notes for a Reduced Pressure Zone Assembly (Domestic, Irrigation, or Irrigation Combined Water Services), a Double Check Detector Assembly, and a Reduced Pressure Detector Assembly (Fire Protection Water Service only).

Tester Technicians

The City of Fort Smith’s Cross-Connection Control Program requires all Backflow Assembly tests to be performed by a certified Assembly Testing Technician licensed by the Arkansas Department of Health.

As a service to our customers, a list of certified testers active in the local area is provided through the link below.

List of Certified Testing Technicians

Backflow Prevention Assembly Test Reports

The water customer shall require the certified assembly testing technician to provide a copy of the certified test and inspection, on an approved form, to the approving authority. Test results shall be documented on the City of Fort Smith Backflow Prevention Assembly Test Report and a copy sent to the approving authority by means of electronic mail, fax, or U.S. mail. A copy of the required Backflow Prevention Assembly Test Report is provided below.

Backflow Prevention Assembly Test Report

Have Questions or Want Additional Information?

Call (479) 494-3913 or Email CrossConnection@FortSmithAR.gov

Free viewers are required for some of the attached documents.
They can be downloaded by clicking on the icons below.

Word Viewer